Elev8r Torch Manual

The ELEV8R Glass Portable Torch Vehicle is the
ultimate glass torch vaporizer made for flowers and concentrates.

ELEV8R Instruction Video:

The pick you get is random.  It may be a marble, a mushroom or some kind of creature.  This is all random and most come with a marble for simplicity.  You can not pick what you get

Herbs

1. Load the wand or water pipe adapter with about 1/2" to 3/4" ground herbs, preferably with a grinder.  Do not fill the wand or water pipe adapter full.  The unit is designed to allow space so the heat from the heater does not burn the herbs, as well as room to allow you to shake your vape to stir the herbs.  
   
2. Add your Elev8R heater to the wand or water pipe adapter and secure it with the sick clip.  Once you get your Elev8r hot, you do NOT want the heater to come off.  The sick clip will lock the heater to the wand or water pipe adapter.
   
3. Holding your wand or water pipe adapter you will now add the flame to the Elev8R heater.  Hold the torch and Elev8R heater at a 45 degree angle, with the flame hitting the Elev8R heater and away from the sick clip.  This will keep the clip from getting too hot.  As you heat the Elev8r heater be very careful to not burn yourself.  Always spin the wand or water pipe adapter for even heating.  This will allow the longest life possible.  
   
1. Never heat the Elev8R heater if you have any containment on it.  The containment can bond to the quartz when heating and cause the quartz to malfunction.
   
2. Less is more.  You can always add heat to your Elev8R heater.  But if you get it too hot and inhale, you could risk catching the herb on fire.  As you first use your Elev8R remember you will find your "SWEET SPOT".  What we mean is each torch is different when it comes to power, as well as how far you hold your Elev8R out in the flame.  After a few sessions you will find how long to hold the torch to the Elev8R for the perfect timing.  Just remember you can always add more.  If you catch your herb on fire, no big deal.  To get the great taste back, just clean with alcohol.
   
4. Stir your herbs part way through your session.  To do this, you will want to gently shake the Elev8R so the herbs mix.  Be careful, and make sure you have your sick clip attached. 
   
5. Add more heat as needed. 

Concentrates

1. Lay your flavor disc out and add some concentrates to it.  If it is warm the concentrates will flow into it better.
   
2. Set the flavor disc inside the wand or water pipe adapter.
   
3. Add the Elev8R heater and secure it with the supplied sick clip.
   
4. Holding your wand or water pipe adapter you will now add the flame to the Elev8R heater.  Hold the torch and Elev8R heater at a 45 degree angle, with the flame hitting the Elev8R heater and away from the sick clip.  This will keep the clip from getting too hot.  As you heat the Elev8r heater be very careful to not burn yourself.  Always spin the wand or water pipe adapter for even heating.  This will allow the longest life possible.  
   
1. Never heat the Elev8R heater if you have any containment on it.  The containment can bond to the quartz when heating and cause the quartz to malfunction.
   
2. Less is more.  You can always add heat to your Elev8R heater.  You can not catch your concentrates on fire, but you do not want to get it too hot.   The flavor comes from a nice low temperature of about 430 degrees F.  As you first use your Elev8R remember you will find your "SWEET SPOT".  What we mean is each torch is different when it comes to power, as well as how far you hold your Elev8R out in the flame.  After a few sessions you will find how long to hold the torch to the Elev8R for the perfect timing.  Just remember you can always add more.  If you catch your herb on fire, no big deal.  To get the great taste back, just clean with alcohol.
   
5. Add more heat as needed